BC-0
11mm
The Buzon BC decking and paving supports are perfect for creating terraces and patios, offering ultimate flexibility and design creativity. BC decking pedestals have an adjustable height of 11 to 1130mm plus a multi-angle head - suited to a range of joint and slab dimensions, allowing them to be used with non-standard paving configurations.
These plastic pedestals offer a unique spacer tab option to separate pavers, inspiring creative architecture with unlimited potential. Unusual shapes and curves are facilitated through the use of rectangular and circular tabs that can be individually positioned to suit your design.
The BC range of adjustable decking supports is ideal for external flooring areas that require strength and stability. The ergonomically designed locking system prevents pedestals and paving support pads from rotating or moving from their specified height.
To help you get the most out of your paving and decking installation, the BC range of adjustable decking legs comes with a variety of accessories. From spacer tabs (to help you separate those odd-shaped pavers) to shims (helping accommodate varying paver thicknesses), the BC range enables ultimate design flexibility.
For ultimate flexibility when it comes to separating pavers with odd shapes, curves, etc, the BC range allows rectangular or circular tabs to be placed individually on the pedestal head in a position to suit your design, maintaining perfect alignment and facilitating drainage. The BC range has spacer tabs in a variety of heights and widths to suit pavers of assorted shapes and sizes, including 20mm porcelain.
Shim options are available for the head or the base of the BC pedestal and depending on where they are used, can be used to aid stability, deaden sound, or to add height either uniformly or to compensate for variations in paver thickness.
Whether correcting existing groundworks, or creating ramps and slopes, the BC range has the potential for up to 10% correction to be added to the pedestal base, and a further 5% to the pedestal head. Additional tools allow you to identify the correction required for each pedestal and then perform the perfect adjustment.
This acoustic pad sits under the pedestal to help deaden sound, whilst providing that little extra protection in more demanding environments. We offer two different thicknesses as standard.
Joist Supports are used to firmly attach timber, composite or metal battens to the head of the pedestal.
If additional height is required for particular pedestal models, Couplers can be a solution. Only supplied on advice - contact us for more information.
Our U-Wall, U-Edge and ALUgrate products allow clean finishes against walls and provide excellent drainage options. The U-End allows the creation of vertical steps where the terrace edge is not enclosed.
In some installs, the potential for wind uplift can be an issue. Our wind resistance discs are used to give extra security by physically locking down pavers to the head of the pedestal.
These can be used alongside pedestals as part of an install where terrace height is variable and minimal height is required.
Disclaimer:
*Information is provided as a guideline only. The number of pedestals used varies based on the specifics of each project. Buzon® cannot be held responsible for variations in quantity.
For tile formats larger than 60mm and / or pedestal heights greater than 100mm, additional supporting pedestals per tile may be required. Mesh backing on tiles may also be advisable in these circumstances.
Please contact us if you need further assistance determining quantities or pedestal layout. Note that calculations for large or complex areas will require supporting CAD files and will have a minimum 7 day lead time.
